Dodge 2010 Journey - Manual (Page 454)

6. Install the bulb and connector assembly into the
taillamp housing and rotate the connector
1 ⁄
4
turn clock-
wise to lock it in place.
7. Reinstall the taillamp housing and fasteners.
Changing the Tail Lamp or Backup Lamp
1. Open the liftgate.
2. Remove the two fasteners retaining the taillamp hous-
ing to the liftgate from the inboard face of the liftgate.
3. Carefully insert a trim stick (plastic flat-blade tool)
between the taillamp housing and the liftgate. Use the
trim stick and hand pressure together to disengage the
taillamp housing from the liftgate.
4. Rotate the applicable bulb’s electrical connector 1 ⁄
4
turn counterclockwise and remove it from the housing.
5. Remove the bulb from the connector socket and install
the replacement bulb.
6. Install the bulb and connector assembly into the
housing and rotate the connector
1 ⁄
4
turn clockwise to
lock it in place.
1 — Tail Lamp Bulb
2 — Backup Lamp Bulb
7
MAINTAINING YOUR VEHICLE 453