Denon 3800BD - Manual (Page 24)

Ver.3.09
1.9.9 Setup
This operation the initial setting .
byte \ bit 7 6 5 4 3 2 1 0
0 STX ( 02h )
1 Command code ( ' E ')
2 Reserve ( 00h )
3 Reserve ( 00h )
4 Reserve ( 00h )
5 Reserve ( 00h )
6 Reserve ( 00h )
7 ETX ( 03h )
8 BCCH ( high-level )
9 BCCL ( low-level )
1) Answers returned
byte \ bit 7 6 5 4 3 2 1 0
0 STX ( 02h )
1 Reply code ( ' E ')
2 Answer code
3 ETX ( 03h )
4 BCCH ( high-level )
5 BCCL ( low-level )
2) Special conditions
• This command is valid only when the mode status is Stop (B) .
• When status code is 4Bh (DIR mode) , this command is not accepted.