Alcatel Shine Lite 5080X - Manual (Page 30)

56 57
2. Touch Wi-Fi, then touch and select Advanced.
3. Touch the Network notification switch to activate/deactivate this
function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
1. Touch on the Quick settings bar to get to Settings.
2 Touch Wi-Fi, then touch and select Add network.
3. Enter the name of the network and any required network information.
4. Touch SAVE.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which you no
longer wish to use.
1. Turn on Wi-Fi, if it’s not already on.
2. In the Wi-Fi screen, long press the name of the saved network.
3. Select Forget network in the dialog that opens.
6.2 Connecting to Bluetooth devices (1)
Bluetooth is a short-range wireless communication technology that you can
use to exchange data, or connect to other Bluetooth devices for various uses.
To exchange data, touch on the Quick settings bar to get to Settings,
then touch Bluetooth. Your device and other available ones will show on the
screen.
(1) You are recommended to use ALCATEL Bluetooth headsets, which have
been tested and proved compatible with your phone. You can go to
www.alcatel-mobile.com for more information about the ALCATEL
Bluetooth headset.
To turn on Bluetooth
Touch
to turn this function on or off.
To make your phone more recognisable, you can change your phone's name
which is visible to others.
1. Go to Settings > Bluetooth.
2. Touch and select Rename this device.
3. Enter a name, and touch RENAME to confirm.
To pair/connect your phone with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on and pair
your phone with the Bluetooth device with which you want to exchange data.
1. Go to Settings > Bluetooth.
2. Touch and select Refresh.
3. Touch a desired Bluetooth device in the list.
4. A dialog will pop up, touch PAIR to confirm.
5. If the pairing is successful, your phone connects to the device.
To disconnect/unpair from a Bluetooth device
1. Touch
after the device name you want to unpair.
2. Touch FORGET to confirm.
6.3 Connecting to a computer via USB
With the USB cable, you can transfer media files and other files between your
phone and computer.
To connect:
1. Use the USB cable that came with your phone to connect the phone to a
USB port on your computer. You will receive a notification "Connected as
a media device".