Hypertherm H401 Power Supplies - Manual (Page 22)

SPECIFICATIONS
2-2 H401 & H601 Instruction Manual
5
Introduction
H401 or H601 with HT4001
Refer to HT4001 instruction manuals 802470 for 200V HT4001 power supplies; or 802000 for all other voltage
HT4001 power supplies.
H401 or H601 with PAC500
The H401 provides power to cut stainless steel and non-ferrous metals up to 1-inch thick and mild steel up to
1/2-inch thick. The H601 provides power to cut stainless and non-ferrous metals up to 2-inches thick and mild steel
up to 1-inch thick.
One H401 and one H601, or two H601s in parallel can provide the full power capacity of the PAC500 torch and cut
at 1000 amps. At 1000 amps, the PAC500 torch can cut stainless steel to 5-inches thick, and aluminum and other
non-ferrous metals to 6-inches thick.
Specifications
H401 Power Supply
Maximum OCV (U
0
) 400 VDC
Current Adjustment Range (I
2
) 200 to 500 A
Output Voltage (U
2
) 80 to 200 VDC (235VDC for high current cutting)
60% @ 100 kW, 104° F (40° C)
Duty Cycle Rating (X)
100% @ 80 kW, 104° F (40° C)
Temperature Rating 14° F ( -10° C) to 104° F (40° C)
Power Factor(cos
ϕ
) 0.47
Cooling Forced Air (Class F)
Input Power (U
1
– Input Voltage; I
1
– Input Current)
036038 200 VAC (U
1
), 3 Phase, 50 Hz, 492 A (I
1
)
036036 400 VAC (U
1
), 3 Phase, 50 Hz, 247 A (I
1
)
036035 480 VAC (U
1
), 3 Phase, 60 Hz, 206 A (I
1
)
036037 600 VAC (U
1
), 3 Phase, 60 Hz, 164 A (I
1
)
Dimensions and Weight
Width 40" (1015 mm)
Maximum Height 53" (1345 mm)
Maximum Depth 50" (1270 mm)
Weight 2250 lbs (1022 kg)