DirecTV SIR-S75 - Manual (Page 18)

Chapter 1: Getting started
10
Satellite In
The RG-6 cable from the satellite dish connects to this jack.
Antenna In
The cable from an off-air TV antenna (not from the satellite dish) connects to
this jack.
Video Out
Using a standard video cable, this jack connects your DIRECTV Receiver to
your TV or VCR.
Audio Out
Using standard stereo audio cables, these jacks connect the DIRECTV
Receiver to your TV or VCR.
S-Video Out
This jack connects your DIRECTV Receiver to a TV or VCR that accepts
S-Video input.
Component Out (Y, Pb, Pr video) (SIR-S75 only)
Using standard A/V cables, these jacks connect your DIRECTV Receiver to a
TV or VCR that accepts high-quality (“component”) video input.
Digital audio out (SIR-S75 only)
Using an optical digital audio cable, this jack allows you to connect your
DIRECTV Receiver to an audio receiver that accepts optical digital audio
input.
TV Out
Using an RF coaxial cable, this jack connects the DIRECTV Receiver to your
TV or VCR.
Channel 3/4 switch
This switch sets the channel for viewing the TV Out signal on your TV.
Telephone line
A telephone line connected to this jack allows you to order
pay per view programming.
VCR control (SIR-S75 only)
The VCR control cable connects to this jack.
Access Card slot (model SIR-S75 only)
This slot holds the Access Card (which allows you to view
DIRECTV
® programming). The Access Card slot is behind the Access Card
door on the front of model SIR-S70.