Hypertherm HD4070 Product Configuration - Manual (Page 48)

HYPERTHERM – HD4070 Power Supply with TWO Integrated Command THC Option – Order Form C
4 8 0 V 2 4 0 V 4 0 0 V 2 0 0 V 4 4 0 V 2 2 0 V 6 0 0 V
60 HZ 60 HZ 50-60 HZ 50-60 HZ 50-60 HZ 50-60 HZ 60 HZ
078102 X – – – – – – No Display Installed
078148 – X – – – – –
078091 – – X – – – –
078137 – – – X – – –
078097 – – – – X – –
078143 – – – – – X –
078108 – – – – – – X
078105 X – – – – – – With Display Installed
078151 – X – – – – –
078094 – – X – – – –
078140 – – – X – – –
078100 – – – – X – –
078146 – – – – – X –
078111 – – – – – – X
Voltage
3
SETUP
REPEAT PREVIOUS
PROCESS NEW PROCESS
1
20 X-Y Lifter - Quantity 2
128606
21 Torch Mounting Block Kit - Quantity 2
128279
128526 10 ft.(3 m)
128527 20 ft.(6.1 m)
128528 25 ft.(7.6 m)
128529 30 ft.(9.1 m)
128530 40 ft.(12.2 m)
128531 50 ft.(15.2 m)
128532 75 ft.(22.9 m)
128533 100 ft.(30.5 m)
128534 150 ft.(45.7 m)
Remote Display Option Kit
Installed Display can be removed
and mounted at a remote location
with a remote cable kit. See Order
form or instruction manual
parts list for kit numbers.
Distributor Information:
Customer Information:
22
Lifter I/O Cable, Motor Drive Cable, Ohmic Contact Wire
23 24
128452 10 ft.(3 m)
128453 20 ft.(6.1 m)
128454 25 ft.(7.6 m)
128455 30 ft.(9.1 m)
128456 40 ft.(12.2 m)
128457 50 ft.(15.2 m)
128458 75 ft.(22.9 m)
128459 100 ft.(30.5 m)
128460 150 ft.(45.7 m)
THC to Power Supply Cable Package - Quantity 2
25 Torch Breakaway Kit Option - Quantity
128281
2
- Use Order Form E 2 18 through Warning: Each power supply can only support one display.
Installation of two displays with one power supply may result in
malfunction or damage.
19 Use Order Form F
Note: A torch receptacle plug 16 a must be used if a two torch system is being used in
single torch mode.
F
1