Danby DBC128BLS - Manual (Page 11)

Before You Call For Service
If none of the above rectify the situation please contact our customer care department
at
1-800-26- (1-800-263-2629)
10
Trouble Shooting
Problem Possible Cause What to do
No Power. A fuse in your home may Replace fuse or reset circuit breaker.
be blown or the circuit
breaker tripped.
Power surge. Unplug the appliance, wait a few
seconds and then plug it back in.
Plug not fully inserted into Make sure the 3-prong plug on the
wall outlet appliance is fully inserted into outlet.
Cabinet Temperature Temperature setting Verify the temperature control setting.
too High adjust if necessary.
Door not shut properly Ensure that the door is fully closed
or opened excessively and that the gaskets are sealing,
against the cabinet. Open the door
only as needed and for short periods
of time.
Recently added a large Limit the quantity of warm cans
quantity of warm cans being introduced to the cabinet at the
to the cabinet same time.
“Clicking” Noise Normal sound No user intervention is required as
this sound is normal during the opera
tion of the appliance. This audible
‘clicking’ noise may be heard as the
appliance ends or begins a cooling
cycle.
Condensation on the High humidity conditions The condensation will subside once
cabinet and/or door in the home. humidity conditions return to normal.
Door not shut properly Ensure that the door is fully closed
or opened excessively and that the gaskets are sealing.
against the cabinets. Open the door
only as needed and for short periods
of time.