Hoefer SUB Series - Manual (Page 14)

At the End of the Run
1 Turn the power supply settings to zero, turn off
mains supply and disconnect the power leads.
2 Visualize the run progression or final separation
on a UV transilluminator.
3 After each use, rinse the apparatus with
DISTILLED WATER ONLY.
4 After each use, wash all components with a
suitable water-soluble disinfectant, to reduce the
risk of infection.
5 Ensure that the connectors are clean and dry
before usage or storage.
Cleaning and Storage
After use, thoroughly rinse all components in
deionized water and gently dry the gold electrode
connectors with a soft tissue.
NEVER USE ORGANIC SOLVENTS.
•
p6
IMPORTANT! Acrylic plastic
is NOT resistant to aromatic
or halogenated hydrocarbons,
ketones, esters, alcohol’s (over
25%) and acids (over 25%), they
will cause “crazing” especially of
the UV transparent plastic and
should NOT be used for cleaning.
DO NOT use abrasive creams or
scourers. Dry components with
clean tissues prior to use.