Highgear VIA - Manual (Page 7)

en
gl
is
h
10
en
gli
sh
11
OPERATING THE VIA PEDOMETER USING THE FM RADIO
(VIA FM ONLY)
1. Plug the headphones into the jack located on
the top of the unit.
2. Reset the radio to the LOWEST FREQUENCY
by PRESSING the RESET button.
3. Advance to the NEXT AVAILABLE
FREQUENCY by PRESSING the SCAN button
located below the face of the unit. Continue
to PRESS the SCAN button until a desired
station is reached.
4. To turn the radio off, unplug the headphones.
CAUTION: The headphones activate the FM
receiver. Leaving the headphones plugged in
the unit for extended periods of time will drain
the battery.
TARGET CALORIES/DAILY CALORIES MODE:
VIA Basic, FM, Pulse and PanicAlarm models
In TARGET CALORIES/DAILY CALORIES
MODE:
1. SET CAL/DAY CAL will display in the current
mode field.
2. TARGET CALORIES will be displayed on the
upper line of the screen. The lower line displays
ACTUAL CALORIES BURNED.
3. The top screen is a Bar Scale, which represents
the percentage of Target Calories you have
burned.
NOTE: Both the DAILY CALORIES and the
BAR SCALE will be automatically reset for
each day.