Changing the batteries – Highgear VIA User Manual

Page 10

gli

VIA BASIC & VIA PULSE:

1. Remove battery door using a coin or other small

object.

2. Remove old batteries.
3. Install new batteries, making sure the polarity

of each is correct.

4. Replace and tighten the battery door.
5. Replace the battery compartment and fasten

the screw.

NOTE: The VIA units are powered by CR2032

3v Lithium batteries. These batteries are very
common and can be found at most drug stores
and camera shops.

CHANGING THE BATTERIES

VIA FM & VIA PANICALARM:

1. Flip open the clip and remove the battery door

by unscrewing the secured screw.

2. Remove old batteries.
3. Replace batteries with new CR2032 x 1(3V)

and CR1130 x 1(3V) batteries, making sure the

polarity of each is correct.

4. Replace and tighten the battery door.
NOTE: The VIA units are powered by CR2032

3v Lithium batteries. These batteries are very
common and can be found at most drug stores
and camera shops.