Highgear AltiTech 2 - Manual (Page 7)

modes of operaTIon
12
english
Keys and TheIr funcTIons
11
english
adVanCe to neXt VariaBle in a prograMMing seQuenCe
QuiCK press the s3 key.
When you have chosen the variable you want for a particular portion of a programming sequence
QuiCK press the s3 key to set and advance to the next variable.
eXit a prograMMing seQuenCe
QuiCK press the s4 key.
Once all variables of a programming sequence have been entered to your satisfaction, QuiCK
press the s4 key to exit the programming sequence and return to the initial main display.
note: As long as you press the s3 key, you will continue to cycle through the variables for that
sequence.
aCtiVate the display BaCKlight systeM
QuiCK press the s4 key.
The backlight will stay active for a period of approximately 5-seconds.
note: Excessive use of the backlight system will result in shorter battery life.
Main display Modes
Advance through the above modes using a QuiCK press of the s3 key. Upon entering a mode, the
name of the mode will be displayed on screen for a period of 1.5 seconds before advancing automat-
ically to the modes primary screen.
time zone one time zone two
pick up time 1 from icons page
tiMe
Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main
altiMeter
Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main
CoMpass
Compass Main Baro Main Alti Main
Alti Log Main Chrono Main Chrono Log Main
Alarm Main
BaroMeter