Highgear AltiTech 2 - Manual (Page 15)

alTImeTer daTa loG memory
28
english
27
english
Clearing data inForMation
To Clear the information in the Altitude Data memory, press & hold the s4 key. The display will
show the word hold flashing in the center line of the display with the words Clear – all in the top
and bottom lines respectively. Continue to hold the s4 key until data 01 appears in the top line along
with 4-dashes in the middle line indicating all data has been cleared from memory.
s1
s4
s2
s3
s1
s4
s2
s3
KEY REFERENCE
s5
s1 s4
s2 s3
AXIS
SUMMIT SUMMIT
ALTITECH 2
s1
s4
s2
s3
s1
s4
s2
s3
ALTITECH 2
KEY REFERENCE
What are laps and splits
The Summit/Altitech displays both lap and split times on screen. A
lap is a discrete period of time from when the Chronograph has
started (Lap 1) or since the end of a previous lap. A split is the
cumulative total of all previous laps. Any time an individual lap is timed
it also automatically generates a corresponding split.
operating the Chronograph
tiMing laps and splits
The Summit/Altitech is capable of timing up to 100 laps and
splits. These can be stored in any combination in up to 30 individual
Runs or workouts. While the Chronograph is running, the top line
will display the time of the current lap, the middle line will show the
time for the current Split. When the timing of a Lap/Split is initiated
the bottom line will show the number of the Lap/Split for approxi-
mately 5-seconds.
The Summit/Altitech features a sophisticated digital Chronograph timing system capable of
storing multiple timed workouts. The chronograph has a resolution of 0.01 seconds and displays both
lap time and split time on screen simultaneously. chronograph screens
main screen lap/split screen
save lap/run clear lap/run
chronoGraph