Highgear Altis - Manual (Page 18)

33
english
34
english
OPERATING THE WATCH
GRAPHICAL ALTITUDE DISPLAY
The ALTIS tracks your Altitude over the previous 24 hours and displays it in a bar graph
format.
NOTE: You may SWITCH ALTIMETER UNITS (feet or meters) by PRESSING AND
HOLDING the START/SPLIT key.
ALTIMETER RECALL MODE
The ALTIS tracks Maximum Altitude over the past 24 hours and charts the trend in a
scrolling graph.
SCROLL THROUGH 24-HOUR TIME LINE by PRESSING the START/SPLIT key. PRESS the
STOP key to SCROLL THROUGH ALTIMETER MODES .
LOG BOOK/DATA RECALL MODE
Reviewing Altimeter Data Logs
Starting in the Data Log screen:
The watch will automatically display the most recent Altimeter Log File recorded with
the
LOG NUMBER in the center line of the display and the DATE of the file in the upper
and lower lines.
1. SCROLL through the recorded files by PRESSING the START/SPLIT key.
2. PRESS the STOP key to VIEW THE SELECTED DATA LOG .
3. SCROLL THROUGH DATA LOG INFORMATION by PRESSING the STOP key.
4. View the information in the following screens:
DELETING DATA LOG FILES
Starting in the Data Log screen:
1. SCROLL through the recorded files by PRESSING the START/SPLIT key.
2. When selected file is displayed, PRESS & HOLD the SET key. The display will read HOLD CLEAR .
CONTINUE HOLDING the SET key. RELEASE the SET key.
3. To CLEAR ALL FILES from memory, CONTINUE TO HOLD the SET key. When all files are cleared, the
screen will display a series of 4 dashes ( ---- ). RELEASE the SET key.
OPERATING THE WATCH
Top Line: Ascent/Descent Rate for period displayed
Center Line: Elevation for time period
Bottom Line: Time line (from current) of Altimeter reading
Top Line: Ascent/Descent Rate for period displayed
Center Line: Elevation for time period
Bottom Line: Time line (from current) of Altimeter reading
Screen 1
Total Ascent & Descent Screen 2
Average Rate of Ascent
& Descent Screen 3
Number of Hills
(A Hill corresponds to a
vertical ascent and decent
of greater than 150 ft.
or 50m) Screen 4
Total Elapsed Time of
Data Log