Operating the watch – Highgear Altis User Manual
Page 17
31
english
32
english
DATA LOG
(continued)
To record a Data Log:
1.
In the Data Log screen,
PRESS & HOLD
the
START/SPLIT
key.
2.
The
DATA LOG NUMBER
will appear in upper display line. The center display
line will flash
START
.
CONTINUE HOLDING
until the active Data Log window
appears (approximately 2 sec.).
To stop recording and store a Data Log:
1.
In the Data Log screen,
PRESS & HOLD
the
START/SPLIT
key.
2.
The
DATA LOG NUMBER
will appear in upper display line. The center display
line will flash
STOP
.
CONTINUE HOLDING
until the static Log Book window
appears (approximately 2 sec.).
3.
To view Data Log files, see
DATA RECALL
page 34.
OPERATING THE WATCH
ALTITUDE DIFFERENTIAL
The ALTIS allows you to track change in altitude from a set point and also tracks time
from beginning of recording.
When Altitude Differential is active:
To activate Altitude Differential function:
1.
In Altitude Differential Mode,
PRESS & HOLD
the
SET
key.
2.
PRESS
the
START/SPLIT
or
STOP
key so the
ALTITUDE READING
(middle display line)
is set to
0
.
3.
PRESS
the
SET
key to
BEGIN READING
.
4.
To
TERMINATE A READING
,
PRESS & HOLD
the
SET
key.
NOTE:
You may also
STOP
and
START A DATA LOG
recording in this mode by
PRESSING AND HOLDING
the
START/SPLIT
key.
5.
To
ABORT
this function,
PRESS
the
START/SPLIT
or
STOP
key so the
ALTITUDE
READING
(middle display line) displays current altitude.
6.
PRESS
the
SET
key to
RETURN TO BAROMETRIC PRESSURE MODE
.
OPERATING THE WATCH
Top Line:
Ascent/Descent indicator arrow/Current Rate of Ascent/
Descent (in Ft/M per minute)
Center Line: + or – change from base elevation
Bottom Line: Elapsed time