Dymo PS20DL - Manual (Page 2)

1
DYMO by Pelouze Downloadable Postal Scale
Your new Downloadable Postal Scale
weighs items up to 20 pounds (9 kg) in
0.1 ounce (2 g) increments. This document
provides instructions for using the scale.
Setting Up the Scale
The scale is powered through the
included power adapter. Optionally, the
scale can be powered by six AAA batteries.
Unpacking the Scale
The scale comes with a serial cable for connecting the scale to your computer.
To unpack the scale
1. Unpack the scale.
2. Set the scale on a firm, flat surface.
3. Plug the RJ11 end of the cable into the RJ11 connector on the back of the scale.
4. Plug the other end of the cable into an available serial port on your computer.
If your computer does not have a serial port, you can connect to a USB port using a
serial to USB adapter.
Connecting the Power
The scale can be powered through the included power adapter or by six AAA batteries.
To connect the power adapter
1. Plug the power adapter into the back of the scale.
2. Plug the other end of the power adapter into a power outlet.
To insert the battery
1. Disconnect the power adapter from the scale and the
power outlet.
2. Turn the scale over.
3. Remove the battery compartment cover.
4. Insert six AAA batteries into the battery compartment
as shown.
5. Replace the battery compartment cover.
Remove the batteries if the scale will not be used for a long period of time.
Power
Enter
LCD
Display
Thumb slot to
lift platform
!
!