Guralp Systems CMG-40TDE - Manual (Page 10)

CMG-40TDE
4 Connector pin-outs
4.1 DATA
This is a standard 10-pin “mil-spec” plug,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-12-10P although the initial “02E” varies
with manufacturer.
Suitable mating connectors have part-
numbers like ***-12-10S and are available
from Amphenol, ITT Cannon and other
manufacturers.
The pin-out is the same as the serial output of a CMG-DM24 digitiser
and any GSL digital instrument, allowing you to insert an instrument
with an embedded CMG-EAM into a pre-existing installation and
maintain connectivity.
Pin Function
A
Power input, 0 V
B Power input, +10 to +35 V
C RS232 CTS
D RS232 RTS
E RS232 DTR
F RS232 DSR
G RS232 ground
H RS232 CD
J RS232 receive
K RS232 transmit
Wiring details for the compatible socket,
***-12-10S, as seen from the cable end (i.e.
during assembly).
10 Issue A