Guntermann & Drunck DiSign-System - Manual (Page 21)

DiSign-Splitter-1AV8
G&D DiSign system · 17
DiSign-Splitter-1AV8
Scope of delivery
 1 × DiSign-Splitter-1AV8
 1 × power cable (PowerCable-2 Standard)
Status displays
The LEDs at the front panel of the device enable you to control the operating status
at all times:
The following table lists the meanings of the different LEDs:
Figure 2: Status displays at the front panel of the DiSign-Splitter
LED Status Meaning
Active This LED is currently not used!
Status lighting The connection to the display module has been successfully established.
blinking No connection to display module.
Check the cable connection.
Table 1: Meaning of the different LEDs
Service
D S -S i ign plitter-1AV8 D S -S i ign plitter-1AV8
Active
Status
Device