Installation – Gullco KBM-18U User Manual
Page 5
3
CUTTER
ROTATION
PLATE TRAVEL
MACHINE TRAVEL
INSTALLATION
ELECTRICAL CONNECTION
WARNING!
As shown in the accompanying drawing, the cutter rotation MUST be clockwise (as
viewed from the front). IT IS IMPORTANT THAT THIS ROTATION DIRECTION BE
CORRECT OTHERWISE DAMAGE TO THE MACHINE MAY OCCUR AND
WARRANTY WILL BE VOID. Be certain to check the cutter rotation before
operating the machine. The plate should be fed in the direction shown if the machine
is static and the material is being manually fed, alternatively, the bevelling machine
should travel in the direction shown if the plate is static and the machine is running
along the plate. If the cutter rotation is incorrect, it means that the 3 phase AC
connection is incorrect and two out of the three Live wires must be swapped.