Gullco KBM-18U - Manual (Page 4)

2
LIFTING (HOISTING)
The recommended method of lifting (hoisting) the Gullco KBM
®
-18U Inverted Portable Plate Edge
Bevelling machine is to use two (2) equal length slings of sufficient capacity (350 lbs [160 Kg]
minimum), fed through the machine as shown below. All lifting (hoisting) equipment must be
suitably rated and clearly identified to be of adequate capacity. Never raise the machine any higher
than necessary and never transport it over the top of people!
WARNING! Do not lift the machine by the wheel
adjusting handles, or any other such
component(s) that could result in
machine damage and/or bodily injury
due to mechanical failure during the
lifting (hoisting) process.