Gullco KBM-18U - Manual (Page 3)

1
READ BEFORE USING THE KBM
®
-18U BEVELLER
Please refer to the KBM
®
-18 Portable Plate Edge Bevelling Machine Parts
List & Operating Instructions document (GD-046) for all other information
not contained within this supplemental manual, as it contains all of the
major wear components used in the KBM
®
-18U machine along with similar
principles of operational procedure, safety instruction, maintenance etc.
KBM
®
-18U PLATE EDGE BEVELLING MACHINE DETAILS
This manual (in combination with the KBM
®
-18 manual, GD-046) covers the operation instructions,
maintenance requirements and provides parts lists for the Gullco Inverted Plate Edge Bevelling
Machine, part number: KBM
®
-18U.
DECLARATION OF CONFORMITY - CE - designed and manufactured in compliance with
89/392EEC provisions and further amendments.
MACHINE SPECIFICATIONS
Maximum Bevel Width: 0.71" [18 mm] at standard 30° bevel angle on material with a
tensile strength of 64,000 lb/in² [45 Kg/mm²] (multiple passes)
Maximum Bevel Depth: 0.61" [15.6 mm] at standard 30° bevel angle on material with a
tensile strength of 64,000 lb/in² [45 Kg/mm²] (multiple passes)
Minimum Plate Thickness: 1/4" (6.3 mm)
Maximum Plate Thickness: 1-1/2" (38.1 mm)
Bevel Speed: 13’ [4 m] per minute
†
Motor: 2 H.p., 3 phase, available for 230, 460 and 575 V at 60 Hz. and
also 380 and 400/415 V at 50 Hz. supply
Gearbox Oil: 1.6 US Gallon (6.1 Litres) of Mobil SHC 630 ( See section “Periodic
Inspection & Maintenance” for further details )
Weight: 332 lbs. [151 Kg.] including under carriage assembly
†
Top speed can vary depending on variations of bevel depth, voltage and frequency.