Gullco KR-200-L - Manual (Page 12)

10
ACCESSORIES
GP-200-023 Forward/Stop/Reverse Footswitch Assembly. This kit provides a directional
footswitch; a footswitch guard cover; a connecting control cable; and strain relief
glands. When activated, the footswitch will provide a run signal and a rotary
direction signal to the control.
GP-200-025 Variable Speed Footswitch assembly. This kit provides a run/stop/variable speed
footswitch; a footswitch guard cover; a connecting control cable; and strain relief
glands. When activated, the footswitch will provide a run signal to the control and
allow regulation of the rotational speed via the compression of the footswitch
pedal.
KR-750 Kamel Idler Roll. Supporting rolls for use with either KR-200-L or KR-200-M
power turning rolls.
KR-750-H Kamel Idler Roll with high temperature cast iron wheels (KR-179-104-H).
KR-1000 CSB A free standing support and cutting torch holder assembly. 1-1/8" [28.6mm]
square rack arms and rack boxes provide 11-1/2" [292.1mm] of vertical
adjustment and 10-1/2" [266.7cm] of horizontal adjustment. Supplied with swivel
mounted, standard rack-type cutting torch holder.
KR-2000 CSB Same as above, except uses 1-1/2" [38.1mm] rack arms and rack boxes and
provides 7-1/2" [190.5mm] of vertical and 6-1/2" [165.1mm] of horizontal
adjustment.
KR-1000 WSB A free standing support and welding gun holder assembly. 1-1/8" [28.6mm]
square rack arms and rack boxes provide 11-1/2" [292.1mm] of vertical
adjustment and 10-1/2" [266.7mm] of horizontal adjustment. Supplied with swivel
mounted, adjustable gun holder assembly.
KR-2000 WSB Same as above, except uses 1-1/2" [38.1mm] rack arms and rack boxes and
provides 7-1/2" [190.5mm] of vertical and 6-1/2" [165.1mm] of horizontal
adjustment.
NOTE: The above cutting torch and welding gun support assemblies can be, and often
are, equipped with one (1) or two (2) Gullco motorized rack arms controlled by a
remote joystick pendant. Ask your local Gullco representative for further details.
Visit Gullco’s web site, “ www.gullco.com ”
to see, or request, more product and
application information.