Digi M10 - Manual (Page 20)

Digi m10 Technical Overview
Digi International, Inc. © 2009 Page 20 of 26
4.3 Temperature Query Response
The Temperature Query Response packet (see Table 4 ) is sent from the Digi m10 to the host
controller, indicating the satellite modem’s temperature in degrees Celsius.
Table 4: Temperature Query Response Packet
0 0x05/0x06 Packet Header
1 0x1A Packet Type
2 Length0
Length of the packet
3 Length1
4 Retry_count/ Pkt Sequence Number
5 Temp0 Temperature value in
little endian
format.(This is a 32
bit floating point
number)
6 Temp1
7 Temp2
8 Temp3
9 Fletch0 Fletcher Checksum
10 Fletch1
NOTE: This packet is sent from the Digi m10 to DTE and it contains the current
temperature of the Digi m10 in degrees Celsius.