Reference documents, Where to get help – Digi M10 User Manual
Page 7
Digi m10 Technical Overview
Digi International, Inc. © 2009
Page 7 of 26
Reference Documents
The following documents were used to create this user guide, and provide more information
about the technologies and standards involved using the Digi m10 ORBCOMM Satellite Modem.
Department of Defense Test Method Standard for Environmental Engineering Considerations
and Laboratory Tests, MIL STD 810E
European Telecommunications Standards Institute, EN 300 832 (A1 version 1.1.1),
Electromagnetic Compatibility for Mobile Earth Stations.
International Electrotechnical Commission, IEC 1000-4-4, Testing and Measurement
Techniques -- Immunity to Fast Transient / Burst Immunity Test.
International Electrotechnical Commission, IEC 61000-4-6, Testing and Measurement
Techniques -- Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields.
ORBCOMM Serial Interface Specification, E80050015.
ORBCOMM Subscriber Communicator (SC) Standards and Specifications, E25050102.
ORBCOMM Subscriber Communicator Type Approval Plan, A25TP0017.
ORBCOMM System Overview, A80TD0008.
RoHS FAQ --
Society of Automotive Engineers, SAE J1455, Joint SAE / TMC Recommended
Environmental Practices for Electronic Equipment Design (Heavy-Duty Trucks).
Technical Requirements for Satellite Earth Stations and Systems (SES); Mobile Earth
Stations (MES) Providing Low Bit Rate Data Communications (LBRDC) using Low Earth
Orbiting (LEO) satellites operating below 1 GHz, EN 3200 721.
Where to Get Help
For additional information or clarifications regarding this user manual, please get in touch with
Digi International using the contact information provided below.
Address
11001 Bren Road East
Minnetonka, MN 55343
Phone
952-912-3456