Greenheck Vari-Green Control - Universal Assemblies (475699) - Manual (Page 2)

475699 • Universal Vari-Green Control Assemblise, Rev. 4, February 2015 Copyright 2015 © Greenheck Fan Corporation 2
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in the
Library under Warranties.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment
AMCA Publication 410-96, Safety Practices for Users and Installers of Industrial and Commercial Fans, provides additional safety
information. This publication can be obtained from AMCA International, Inc. at www.amca.org.
Drive Frame Mounting
For use on G, CUE and CW units
• Fasten transformer to
mounting bracket via
(4) supplied screws (#10 x 1/2).
• Bend top of bracket away from
transformer, by hand, along laser
stitched line, forming a
90 degree angle.
• Attach bracket to drive frame
angles, using the pre-exisiting
holes and the (2) supplied
screws (#10 x ½).
G/CUE with
transformer mounted
Section 2
For Motor Part Numbers
310420 311156
Fan Housing Mounting
For use on SQ units
• Fasten transformer directly to
outside of unit via (4) supplied
screws (#10 x 1/2).
For use on SWD units
• Fasten transformer to Drive
Frame Angles using the
pre-existing holes and the
(4) supplied screws (#10 x 1/2).
SWD-13
with transformer and switch