Greenheck RL147 Positioner Relay User Manual
Technical instruction, Rl 147 positioning relay

Landis & Gyr, Inc.
Technical Instruction
Document Number 155-038
RL 147-2
May, 1996
RL 147 POSITIONING RELAY
DESCRIPTION
The RL 147 Positioning Relay is a compact pneumatic device
designed to provide positive positioning of a pneumatic valve
or damper actuator. The positioner provides supply air
pressure against the actuator diaphragm to initiate stem or
shaft movement. The actuator spring reverses the stem or
shaft movement.
FEATURES
•
Rapid response
•
Good repeatability
•
Adjustable start point pressure
•
Adjustable span
•
Low air consumption
SPECIFICATIONS
Operating:
Ambient Temperature Range
Storage...................................... -20 to 160°F (-29 to 71°C)
Operation .......................................35 to 160°F (2 to 71°C)
Maximum Pilot Signal Pressure .....................30 psig (207 kPa)
Maximum Supply Air Pressure .......................60 psig (413 kPa)
Start Point Adjustment Range ................. 3-10 psig (21-69 kPa)
Operating Span Adjustment Range......... 3-12 psig (21-83 kPa)
Response .................................1/10 psi Input change (0.7 kPa)
Air Capacity @
∆
P = 2 psi (14 kPa) ............ 410 scim (112ml/s)
Air Consumption............................................. 40 scim (11 ml/s)
Figure 1. The RL 147 Positioning Relay mounted on a
No. 6 Damper Actuator.
PRODUCT NUMBERS
Refer to Table 1.
SPECIFICATIONS, Continued
Physical:
Air Connections ........................................... 1/8" (3.2 mm) NPT
Body Materials .................................................................... Zinc
Cover.......................................................... Electro Plated Steel
Dimensions .................................................................Figure 14
Shipping Weight w/Kit ........................................... 2 lb. (0.9 Kg)
Table 1. Product Numbers for Positioning Relay and Mounting Kits.
Description of Actuator Type
Order Numbers
Reference
Positioning Relay
Mounting Kit
Page
No. 3 Damper Actuator For actuators manufactured after 1/1/93
147-2000
147-104
7
No. 4 Damper Actuator
147-2000
147-314
7
No. 6 Damper Actuator
147-2000
147-276
8
8" Valve Actuator
For Flowrite actuators manufactured after 3/1/96
599-00426
Contains both relay and mounting kit
9
For Model 3 Flowrite actuators manufactured between 3/1/93
and 1/1/96
147-2000
147-333
8
For Models 1 and 2 Flowrite actuators. Also order spring arm
# 147-307 for use with VF 591 5” and 6” balanced valves
147-2000
147-277
10
12” Valve Actuator
For Flowrite actuators manufactured after 1/1/96
599-00423
Contains both relay and mounting kit
9
For Flowrite actuators manufactured between 3/78 and 1/1/96
147-2000
147-311
11
For Super Flowrite and 12” Flowrite actuators manufactured
before 3/78
147-2000
147-279
10