Greenheck CBF (462051) User Manual
Read and save these instructions, Installation, operation and maintenance manual
READ AND SAVE THESE INSTRUCTIONS
Installation, Operation and Maintenance Manual
Parts List
1. Grill
9. Electrical Cord
2. Grill Screw
10. Receptacle plug (115 Volt only)
3. Block Fan Housing
11. Blower screw
4. Blower Panel
12. Blower nut
5. Blowers
13. Tinnerman clip
6. Blower Support Angles
14. Junction Box
7. Blower Panel Screw
15. Rivet
8. Grill Tabs
Model: Concrete Block Fan
(CBF-205)
Tools Required-
Philips Head Screwdriver
Hex Head Sockets and wrench
WARNING!
To reduce the risk of fire, electric shock, or injury to persons observe the following:
Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the
manufacturer.
For General Ventilation use only. Do not use to exhaust hazardous or explosive materials and vapors.
Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent
power from being switched on accidentally. When the service disconnecting means cannot be
locked, securely fasten a prominent warning device, such as a tag, to the service panel.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this
unit’s operation. Follow the heating equipment manufacturer’s guideline and safety standards such
as those published by the National Fire Protection Association (NFPA), and the American Society for
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
See other side for Service and Maintenance instructions.
PN 462051