Our commitment, Flow damper blade – Greenheck HPR Series Adjustment on Pressure Relief Dampers (469134) User Manual
Page 2

Start-open pressure is adjusted by either changing
weight center distance from axle center line, or
by increasing or decreasing the quantity of plates
mounted to arms. In extreme cases, the arm length
and quantity must be changed. See table at the end of
procedure for replacement parts.
Adjust weight center distance first. Loosen fasteners
holding weight plates to arm and move inward or
outward in arm slot as required. Moving plates toward
axle will reduce start-open pressure; increasing the
center distance will increase the pressure at which
blades start to open. If a greater range of pressure set
adjustment is required, add or remove plates from arms
as required to obtain the required start-open pressure.
Check all fasteners for tightness.
Pressure Setting Procedure cont....
Components
Applicable
Model
Galvanized Part
Number
Stainless Steel
Part Number
Axle adapter, 3/8” sq. to 3/4” OD, 3”
long
HPR-120
458959
NA
Axle adapter, short, 3/4” OD
HPR-120
370120
416343
3/4” crankarm
All
653630
687738
3/8”-16 x 2 crankarm bolt
All
415882
415924
3/8”-16 hex nut for crankarm
All
415457
416168
Short counterweight arm (81/2”)
All
647344
689404
Long counterweight arm (121/2”)
All
657343
683951
3/8”-16 set screw for short/long arm All
415050
415763
3/8”-16 weld nut for short/long arm
All
415127
415928
Counterweight plate, 11/4” x 31/2”
All
653144
687637
Counterweight plate, 21/2” x 31/2”
All
653143
687636
Counterweight plate, 31/2” x 31/2”
All
653142
687635
Bolt, 1/4” - 20 x 11/4”
All
415973
NA
Bolt, 1/4” - 20 x 11/2”
All
415517
416103
Nut, 1/4” - 20
All
415455
415575
Table of Components
FLOW
DAMPER BLADE
Figure 2C Vertical Down Flow
469134• HPR Series Rev. 2, October 2012
Copyright 2012 © Greenheck Fan Corporation
As a result of our commitment to continuous improvement, Greenheck reserves the right to change
specifications without notice.
Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in
the Library under Warranties.
®
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com
Our Commitment