Greenheck AMB Series External Mount (468753) - Manual (Page 3)

Tools Required:
Wrenches:
(1) 3 /
8
in., (1) 7 /
16
in., and (1) 10mm
These instructions apply to the external field installation of Belimo actuators on Greenheck model SEVCD Control Dampers
when they are duct mounted or sleeved
Actuator (representation)
Item Part No. Qty Description
1 1 Belimo actuator
2 689990 1 Anti-rotation bracket 316SS
3 687784 1 Standoff bracket non-jackshafted units 316SS
4 687405 1 Standoff bracket jackshaft units 316SS
5 415475 8 CS 1/4-20 x 1/2" bolt 316SS
6 415702 8 1/4-20 hex nut 316SS
7 463888 1 Belimo mounting stud 316SS
8 415702 1 #10-32 SS nut
! !
CAUTION
Device Malfunction Hazard. Improper set screw tightening causes device malfunction. Tighten set screws
with proper torque to prevent damper shaft slippage.
! !
WARNING
Equipment Damage or Electrical Power Hazard. Line voltage can cause death or serious injury and short
equipment circuitry. Disconnect power supply before installation.
Severe Environment (316SS)