Grandstream LinkCom IP Door System with Grandstream Configuration Guide User Manual
Page 3
Grandstream Networks, Inc.
LinkCom IP Door System & Grandstream IP Multimedia Phones
Page 3 of 13
www.grandstream.com
Configuration Guide
Last Update : 03/2013
I
NTRODUCTION
The purpose of this document is to provide basic configuration guidance for LinkCom IP Door System &
Grandstream IP Multimedia Phones GXV3140, GXV3175 and GXV3175v2.
This guide is applicable to the following Grandstream IP Multimedia Phones (GXV3140 with firmware
1.0.7.76 or high, GXV3175 with firmware 1.0.3.74 or higher and GXV3175v2 with firmware 1.0.1.46 or
higher)
Be aware that different firmware revisions may have different web interface formats and functionality.
This guide is describing 3 basic scenarios:
1- Peer LinkCom IP Door System with a GXV3140, a GXV3175 or a GXV3175v2 (Single Peer)
2- Peer LiknCom IP Door System with Multiple Grandstream GXV3140 and/or GXV3175v1/v2 (Multi-
Peers)
3- LinkCom IP Door System with Multiple Grandstream GXV3140 and/or GXV3175v1/v2 using a SIP
server
T
UTORIAL
E
NVIRONMENT
For this tutorial, we will be using Grandstream IP Multimedia Phone GXV3175v2 with firmware 1.0.1.46
and Grandstream IP Multimedia Phone GXV3140 with firmware 1.0.7.76.
GXV3175v2 IP is 192.168.60.103
GXV3140 IP is 192.168.60.130
LinkCom IP is 192.168.60.203
Note: Make sure that devices are set to use Static IPs; otherwise, the communication cannot be
established if one of them changes its IP from original one. (This apply to First and Second scenario only)