Grandstream Action URL Guide - Manual (Page 9)

ActionURL Module User Guide Page 8 of 9
USING ACTIONURL MODULE
Here is an example shows the full steps how to use ActionURL on a GXV3240:
1. Go to GXV3240 web GUI-> Maintenance -> Event Notify, add the ActionURL to specified phone
events following the standards. The figure shows an example of multiple ActionURL in different phone
events:
ActionURL:
Incoming Call: 192.168.40.207/mac=$mac&local=$local
Outgoing Call: 192.168.40.207/remote=$remote&phone_ip=$phone_ip
On Unhold: 192.168.40.207/call-id=$call-id&program_version=$program_version
Figure 3: Multiple ActionURL
2. Make an incoming call, an outgoing call, and unhold the call for the phone, capture the traffic, phone
will send the ActionURL with actual values to SIP server, in order to achieve to notify phone events, as
the figure shows below. From top to bottom, the phone events included in the HTTP messages are:
Outgoing Call, Incoming Call and the On Hold.