beautypg.com

Actionurl format, Figure 1: actionurl example on phone web ui – Grandstream Action URL Guide User Manual

Page 7

background image

ActionURL Module User Guide

Page 6 of 9

ACTIONURL FORMAT

Users need to go to web GUI -> Maintenance -> Event Notify to add the ActionURL with the dynamic

variables. Here are the standards of ActionURL:

1. The IP address of the SIP server needs to be added at the beginning of the ActionURL, and separate

the dynamic variables with a “/”.

2.

The dynamic variables need to have a “$” at the beginning, for example:

 local=$local
 call-id=$call-id

3.

If users need to add multiple dynamic variables in the same event, users could use “&” to connect with

different dynamic variables. You can see the example of ActionURL in the figure below:

Figure 1: ActionURL Example on Phone Web UI

See also other documents in the category Grandstream Communication: