Grandstream GXV3610 2 Series Mounting Installation Guide - Manual (Page 8)

Grandstream Networks, Inc. GXV3610_HD/FHD Mounting and Installation Guide Page 8 of 14
Last Updated: 10/2013
Step 3
Separate the U-collar and the locking collar from the camera dome.
Step 4
Place the mounting template on the desired mounting surface as a reference. If not using wall anchors,
please skip this step. If using wall anchors, use a drill to make the hole at the four screw locations to be
approximately 7mm and then insert the wall anchor into the hole. Remove template when finished.