Grandstream GXV3610 2 Series Mounting Installation Guide - Manual (Page 3)

Grandstream Networks, Inc. GXV3610_HD/FHD Mounting and Installation Guide Page 3 of 14
Last Updated: 10/2013
S AFETY C OMPLIANCES
These instructions are intended to assist users with the operation of the GXV3610_HD/FHD and to
instruct on how to avoid dangerous situations or damage to the device.
Warning: Serious injury or death may be caused if any of the warnings below are neglected.
Caution: Injury or damage to the equipment may occur if any of the following caution messages
are neglected.
Warning: Follow these safeguards to prevent
serious injury or death.
Caution: Follow these precautions to
prevent potential injury or
material damage.
Warning:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with DC 12V according to the IEC60950-1 standard. Please refer to the technical
specifications for more details. Do not use a third-party power adapter or power cord. When the
device installed on the wall or ceiling, make sure that it is firmly attached.
Notice：
Make sure that the power supply voltage is correct before using the camera.

Do not drop the device or expose it to physical shock.

Do not expose the device to temperatures outside the range of -20 oC to +50oC when the device
is in operation.

Do not expose the device to damp/wet conditions or high electromagnetism radiation. To avoid
heat accumulation, make sure that your operating environment has proper ventilation.

Do not attempt to open, disassemble, or modify the device
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according to their
average lifetime. The average lifetime varies from the differences between operating environments
and usage history. Regular maintenance checks are recommended for all users.
Please contact your dealer for more details.