Daewoo KOR-630A0A - Manual (Page 14)

13
5. To remove control panel parts.
1) Remove the screw which secure the control panel, push up two snap fits and draw forward the control panel assembly.
2) Remove the door open lever from the control panel.
3) Remove four screws which secure the PCB assembly to control panel.
4) Disconnect membrane tail from the connector of the PCB assembly.
5) Detach membrane from the control panel.
6) Remove door open button and button spring from the control panel.
7) Reverse the above steps for reassembly.
REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK
B01 3518221400 SWITCH MEMBRANE KOR-630A0A 1
B02
3516719510 CONTROL PANEL ABS AF-345, HFA-700HT 1 KOR-630A0A/1A
3516719540 CONTROL PANEL ABS AF-348, VT-0826 1 KOR-630A9A
B03
PKMPMSZD00 PCB MAIN AS KOR-631A0A 1 KOR-630A0A/1A
PKMPMSZ400 PCB MAIN AS KOR-631H9A 1 KOR-630A9A
B04 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN 1
B05 3513702710 LEVER DOOR OPEN ABS XR-401 H-2938 1
B06 441G430171 SPRING BUTTON SWP DIA0.7 1
B07 3516907300 BUTTON DOOR OPEN ABS AF-345 HFA-700HT 1
1) KOR-630A
REF NO. PART CODE PART NAME DESCRIPTION Q’TY REMARK
B01 3518521310 SWITCH MEMBRANE KOR-860A0A 1
B02 3516720410 CONTROL PANEL ABS AF-345, HFA-700HT 1
B03 PKMPMSNF00 PCB MAIN AS KOR-860A0A 1
B04 7122401211 SCREW TAPPING T2S TRS 4X12 MFZN 1
B05 3513702710 LEVER DOOR OPEN ABS XR-401 H-2938 1
B06 441G430171 SPRING BUTTON SWP DIA0.7 1
B07 3516907300 BUTTON DOOR OPEN ABS AF-345 HFA-700HT 1
2) KOR-860A