Grandstream GXP2200 Quick Installation Guide User Manual

Page 6

The GXP2200 extension module is an ideal solution for the busy enterprise envi-

ronment looking to add the ability to receive and dispatch calls efficiently. Each ex-

tension module has 20 programmable buttons, Left and Right buttons, supporting

40 Multiple Purpose Keys to be configured. GXP2200 supports up to 4 extension

modules, adding 160 fully programmable phone extensions to the phone.

Note: The extension module is an additional accessory for the GXP2200 and is

not included in the GXP2200 box.

Note: For the detailed user manual, please download from:

http://www.grandstream.com/support

GXP2200 Extension Module Package Content:

Configuring GXP2200 Extension Module:

1. Login GXP2200’s web GUI and configure Multiple Purpose Keys for Extension

board 1/2/3/4 following the GXP2200 web GUI tabs;

2. On the GXP2200 extension board, press Left or Right button to browse all the

MPKs’ status in different pages;

3. For more information, please refer to the GXP2200 user manual.

3. Connect the extension board to GXP2200 via the EXT port using the RJ11-RJ11

cable provided;

4. Install the phone stand on GXP2200 and extension board;

5. Power up the GXP2200. The GXP2200 extension board will show the booting

up screen with version information and connecting status;

6. After successfully booting up, the extension board will stay in idle. Press and

hold the Left button for 3 seconds to check the version information and status.

Installing GXP2200 Extension Module:

1 X GXP2200

Extension Board

1 X GXP2200

Extension Board Stand

1 X RJ11-RJ11 Cable

1 X Extension Board

Connector Plate

4 X Screws

1. On the back of GXP2200 and the extension board, there are slots for connector

plate. Attach the connector plate between the slots for GXP2200 and the exten-

sion board;

2. Apply the screws provided and securely tighten them in (see Figure in the next

page);

GXP2200 EXTENSION MODULE: