Grandstream GXP1620 Quick Installation Guides - Manual (Page 5)

Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
1. Make sure the phone is idle.
2. Press the MENU button to access the keypad MENU to
configure the phone.
3. Select MENU->Config, to configure settings for SIP Proxy,
Outbound Proxy, SIP User ID, SIP Auth ID, SIP Password.
4. Follow MENU options to configure the basic features of
the phone. For example: the IP address if using a static IP.
For details, please check GXP1620/1625 User Manual.
5. Please contact your ITSP (Internet Telephony Service
Provider) for additional settings that may be necessary to
configure the phone.
5. The default administrator username and password are
“admin”; the default end-user username is “user“ and the
password is “123”.
Configure the GXP1620/1625 using the Keypad:
5 6
GXP1620/1625不预设对医院，执法机构，医
疗中心(急救服务)以及各种紧急服务的紧急通话
服务。用户必须自行设定紧急通话功能。用户必
须自行购买SIP兼容的网络电话服务，正确的设
定GXP1620/1625使用该服务，并定期测试您
的配置以确保GXP1620/1625如预期工作，否
则请购买传统无线或有线电话服务来拨打紧急通
话。
Grandstream Networks 公司的GXP1620/1625
不支持紧急通话服务。Grandstream Networks
公司、其管理者和员工以及其相关机构对此所造
成的任何索赔、损失或者损害都不负有任何法律
追究责任。在此，您将无权对任何以及所有由于
无法通过GXP1620/1625拨打紧急电话以及没
有遵照前段文字描述而造成紧急通话失败的事件
提出诉讼。
ZH
1. Ensure your phone is powered up and connected to the
Internet.
2. Press MENU button to go into menu of the phone.
3. Press the “down” arrow button to “Status” and press
MENU button to check the IP address.
4. Type the phone’s IP address in your PC browser. (See
figure below).
PHONE CONFIGURATION:
Configure the GXP1620/1625 Using Web Browser: