Genee World GV-9100 - Manual (Page 19)

17
USB IMAGE CAPTURE
You can capture and control images on the visualiser from a computer
connected with a USB connector.
Click [Start] -> [Program] -> [VideoCap] -> “VideoCapx.xx”
(x.xx is software’s
version) to open the software.
A. Static Images Snap
Click “Capture”—>“Capture Frame”, input the file name in dialog box, or
you can click icon on the toolbar, then input file name in dialog window.
The image file is JPG format.
B. Snap Video Stream
Click “Capture”—> “Start Capture”, input the file name in dialog box, or
click
icon on the toolbar, then input the file name in dialog box. If you
want to set the time limit for the capture, select “Capture” ->“Set Time
Limit“ to set the time limit. Click “Start Capture” to start capture, and click
“Stop Capture” or
icon on the toolbar to stop capture. (If you have set
the time limit, it will stop automatically when the time is up.) The video file is
AVI format.
C. Set the Frame Rate
Click [Capture] -> [Set Frame Rate], and click open “Choose Frame Rate”
to set the frame rate.
D. Set Time Limit
Click [Capture] -> [Set Time Limit] to set the time limit while capturing
video.
E. Note:
Do not connect / disconnect the USB cable when the application is running,
which will cause the program to be interrupted.