Configuration and operation – Geist R-Series PDU v4 User Manual

Page 21

Web Interface

Sensors

System

Help

Overview

Users

Time

Info

Alarms & Warnings

Network

Admin

Support Site

Cameras

Locale

Logging

SNMP

Restore Defaults

LDAP

Firmware Update

Syslog

3. Log In / Log Out

Click to log in or log out of the unit. Note that both user-name and password
are case sensitive; prohibited characters are: $&`:<>[ ] { }"+%@/ ; =?\^|~',

4. Alarms and Warnings

Indicates the number of Alarms and Warnings currently occurring, if any.

5. Device Label

Displays the user-assigned label of this unit (see "Configuration and Operation")

6. Device ID

Unique product identification. May be required for technical support.

7. Total and Individual Phase or Line Monitor

Displays AC current, voltage, and power statistics for each individual phase,
and for the total of all phases combined.

8. Current Monitor

Displays AC current draw statistics for each individual circuit on the PDU.

Note: Groupings for Total, Line, Phase and Current Monitor will vary depending on
the PDU's configuration and wiring.

Configuration Icon

Operation Icon

4.1.1.1 Configuration and Operation

Note: Only users with control-level authorizations have access to these settings.

Device, Phase and Circuit Configuration:

1. Click the desired Configuration icon to change the device's Label. (Name is the

PDU's factory name or model, and cannot be changed.)

2. Once done, click Save.