Geist RCX Series v3 - Manual (Page 28)

GM1111 28 Revision Date 4/3/2014
Unit Configuration
Network Configuration
The unit’s network configuration is set on the Network tab of the Configuration page. Settings
pertaining to the unit’s network connection are:
Figure 30: Network Configuration
 DHCP: Allows the unit to request a dynamic IP address from a server on the network.
 Static IP Address/Net Mask/Gateway: When not using a dynamic address, enter static
network configuration information here.
Telnet Service: Enable or disable the built-in Telnet server. See
 Telnet (page 34) for details.
 HTTP Services: Enables/disables access via HTTP and HTTPS. Available options are: HTTP
and HTTPS, HTTP only, and HTTPS only. It is not possible to disable the web interface
completely.
 HTTP/HTTPS Server Port: Changes the TCP port that each server listens on.