D-Link DCS-G900 - Manual (Page 21)

21
DCS-G900 User’s Manual
D-Link Systems, Inc.
DCS-G900 Configuration
Advanced > Wireless
Infrastructure is a wireless connection using an access point as
a transmission point of all wireless devices. Ad-Hoc is a wireless
connection used without an access point. This basically connects the
PC directly to the DCS-G900. This is done using the on-board wireless
adapter on the DCS-G900 connected to a wireless adapter on the
PC.
Service Set Identifier is an identifier for the wireless network name that
other devices can recognize.
This page will allow you to select a wireless network that the DCS-G900
was able to detect upon booting up (see page 14).
The default wireless channel setting is channel 6. Select the channel
that is the same as the other wireless devices on your network. For the
U.S. region, there are up to 11 channels and anyone of them can be
selected to achieve the best signal.
Connection Mode:
SSID:
Site Survey:
Wireless Channel:
Wireless Interface