GAMMA X-Stringer X-6FS STRINGING MACHINE (Issue 1 - May 2004) - Manual (Page 8)

7
STRINGING THE FRAME
The drop weight is of a two piece design.
When assembled, it will accomodate ten-
sions from 20 lbs. to 90 lbs. For tensions from
8 to 20 lbs., remove the 5mm bolt on the face
of the drop weight, and use the smaller
portion of the weight as described above.
Note: Tensions above 77lbs. require re-
moval of the drop weight bar endcap.
Setting Tension
To set the stringing tension, loosen the
locking knob on the side of the drop weight.
Slide the weight in the appropriate direction
until the face closest to the string gripper is
indexed with the desired tension mark on the
tension bar.