GAMMA X-Stringer X-ES STRINGING MACHINE (Issue 1 - May 2004) - Manual (Page 12)

To open the drawers, reach under the right
side end caps to find the the spring loaded
latch handle. Pull the latch handle toward
the outside of the end cap to release latch
from the end cap and
slide the drawer out.
To close the drawer
simply slide the
drawer back inside
the base and the latch
with automatically
lock into place.
Storage Drawers
There are two storage drawers located in the
base of the machine. The drawers open
from the right end of the base and lock into
the end cap with a spring loaded latch.
11
ADDITIONAL FEATURES
Cutting Block
A cutting block is provided to provide a
surface for cutting a point on the strings
using a razor blade cutter.
View from underside
of end cap showing
latch handle.