GAMMA 6004 STRINGING MACHINE (Issue 3 - December 14, 2000) - Manual (Page 5)

4
ASSEMBLY INSTRUCTIONS
Tension Track Installation
Place the tube of the tension track assembly over the top
of the upper column support. Align the tension track with
the long leg of the base assembly. Securely tighten the
two socket set screws on the tension track assembly
tube, locking it to the upper column support. Align the
notch in the tool tray with the tension track bar while
raising the tool tray. Secure the tray with the set screws
in the side of the tray casting.
Tool Tray Installation
Lower the tool tray over the top of the upper column
support and let it rest loosely on the bellows assembly.
Bellows Installation
The bellows assembly is supplied in two pieces and
should be assembled as follows. Place the bellows
section with the flange over the upper support column
with the flange on the top. Place the remaining bellows
over the upper support column and mate it with the
flange on the lower bellows.