Basic operation – Denon DVD-3930CI User Manual
Page 37
ENGLISH
ENGLISH
Basic Operation
34
Basic Operation
Turning the power on
Press
.
• “0h00m00s” is displayed if no disc is loaded.
¢
ON:
The power indicator lights green.
£
OFF:
The power indicator turns off.
The power indicator lights red if the standby mode is set by
pressing
[
POWER OFF
]
5
2
1
5
1 2
About the button names in this explanation
<
>
: Buttons on the main unit
[
]
: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
¢ Turning the power off:
Press
• When the power is turned off from the standby mode, it is set to the
standby mode when the power is turned back on.
NOTE:
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
Loading discs
Press
5
.
For instructions on loading discs, see page 4.
¢ To close the disc tray:
Press
5
again.
Playing discs
Press
1
.
• The “
1
” indicator lights and playback starts.
• For details, refer to the disc’s instructions.
Some discs may be designed by the software producer to operate
in ways other than described in this manual.
To stop playback
Press
2
.
• Playback stops and the wallpaper is displayed.
If “AUTO POWER MODE” at “OTHER SETUP” is set to “ON”
in the initial settings (
page 27), the power automatically
turns off and is set to the standby mode if the player is left in the
stop mode for about 30 minutes.
¢ About the resume function
If
2
is pressed during playback, the position at which the disc was
stopped is stored in the memory (“
1
” flashes on the display).
If
1
is pressed now, playback resumes from the point at which it was
stopped.
The resume function is canceled if the disc tray is opened or if
2
is
pressed again.
• The resume function operates for discs on which the elapsed time
is indicated on the display during playback.
• The resume function does not work when playing menus.