Datavideo RMC-90 - Manual (Page 12)

11
Connect to SE-800
Remote RS-232
interface
Pin 2: RX, Pin 3: TX
Pin 5: Ground
Others: Not connected
DC 14.4 --- 15V input
from SE-800 Power
adaptor
Pin 1: Ground
Pin 4: VCC
DC 12V 0.5A output
to connect to external
12V DC powered
peripherals
DC 14.4 --- 15V output to
SE-800 Power input
Pin 1: Ground
Pin 4: VCC
Connect to Datavideo TLM-404
4”x4 TFT LCD or connecting an
certain adaptor cable to control
the Tally interface of video input
source devices, such as Came
The D-Sub 15-pin connector works
by closing contacts between a
ground pin and the corresponding
LED pin as following pin out table.
*.
Do not give power to the pins.
Video
Channel
RED LED
(On Air - Live)
GREEN
LED
(OffLine - Safe)
AMBER LED
(Next - Cued)
A Pin 1 Pin 2 Pin 3
B Pin 6 Pin 7 Pin 8
C Pin 11 Pin 12 Pin 13
D Pin 5 Pin 10 Pin 15