Fronius Acctiva Twin 15A - Manual (Page 49)

47
EN
Removing the
cover If necessary, use a screwdriver to remove:
-
Display (1)
- Cover (2) for connection P3 - visual
port
- Cover (3) for connection P4 - multiport
If necessary, use a pair of pliers to remove:
-
cover (4) from P2 connection - char-
ging cable socket
Fitting the option-
al bracket and
strain relief de-
vice
- Undo three screws (1)
- Fit bracket (2) using the previously re-
moved screws (1)
- Undo screw (3)
- Fit charging cable strain relief device
(4) using the previously undone screw
(3)
(3) (1)
(4)
(2)
IMPORTANT! The cover (4) must be fitted on connection P2 if only one battery (P1) is be-
ing charged.
1
1
2
(1) (2) (3) (4)
IMPORTANT! The torque for all screws is
2.5 Nm.