Fronius Acctiva Easy MC 04 - Manual (Page 28)

6
Mains voltage U
1
[V AC] 100 - 240 V
Mains voltage tolerance +/-15 %
Mains frequency 50/60 Hz
Max. open circuit power consumption per charging circuit 1.5 W
Nominal output P
1
depends on U
1
MC 04 (U
1
V AC 100 - 240 V) 135 - 235 W
MC 06 (U
1
V AC 100 - 240 V) 200 - 350 W
Max. nominal output per charging circuit at U
1
230 V 48 W
Charging voltage [V DC] per charging circuit (vehicle voltage) U
2
12 V
Arithmetic charging current [A DC] at 230 V per charging circuit I
2
4.0 A
R.M.S. current [Aeff. DC] * 66per charging circuit 6.0 A
Battery capacity per charging circuit 3 -110 Ah
Chargeable cells per charging circuit 6
On-time 100 %
Charging characteristic IUoU
Protection IP30
Time until safety cut-out per charging circuit 55 h
Operating temperature ** -10°C to +60°C
14°F to 140°F
Transport and storage temperature -20°C to +80°C
4°F to 176°F
Weight
MC 04
5770 g (12.72 lb.)
MC 06 7060 g (15.56 lb.)
Dimensions w x h x d
MC 04
418 x 288 x 98 mm (16.5 x 11.3 x 3.9)
MC 06 584 x 288 x 98 mm (23.0 x 11.3 x 3.9)
* R.M.S. current corresponds to the specifications for conventional battery chargers
** The charger’s technical data assume that the ambient temperature will not normally
exceed 25°C, but may occasionally reach 35°C. If the ambient temperature is excee
ded, decreased output power and/or temporary malfunction may result.
The proper functioning of the charger is tested at 5-85% humidity
Component specification: Climate class B
Technical data
Multi Charger 04 /
06
Safety cut-out
(continued)
Cause: Active accessories using too much power
Remedy: Switch off accessories and restart charging
Cause: Faulty battery (e.g. cell short circuit, smell of gas, differing cell temperatu-
res, housing deformation, different liquid levels or liquid leaking, etc.)
Remedy: Have battery checked. On no account allow charging to continue
Cause: Incorrect charger type for this application
Remedy: Have battery and multicharger checked and ensure they are compatible