D-Link DFE-530TX+ - Manual (Page 11)

DFE-530TX 10/100Mbps Ethernet Adapter for PCI Bus
Introduction 3
Features
Designed for versatility and performance, the DFE-530TX
Adapter provides the following features:
• 32-bit PCI Bus Master memory access for high
throughput.
• PCI clock speed up to 33Mhz, independent of network
clock.
• Comply with Advanced Configuration and Power
Interface specification v1.0
• ACPI 1.1 power management compliant.
• Wake-On-LAN power-saving feature allows sleeping
PCs to be woken up and used via remote stations.
• Complies with IEEE 802.3 100Base-TX and 10Base-T
Ethernet standards.
• Plug and Play installation.
• RJ-45 connector for network cable connection.
• 100Mbps Fast Ethernet or 10Mbps Ethernet data
transfer, selected via auto-negotiation.
• Full duplex or half-duplex operation, selected by auto-
negotiation.
• IEEE 802.3x Flow Control enabled with full duplex
operation, allowing enhanced operation when directly
connected to a switch.
• 32-bit intelligent Ethernet controller.
• Built-in FIFO buffers reduce overhead of memory
transfers.
• Three LED indicators.
• Drivers for all leading Network Operating Systems.