Foxconn NF4SLI7AA-8EKRS2 Raid manual - Manual (Page 5)

3
Install Hard Disks
Install SATA hard disks:
STEP 1: Install one SATA hard disk into one drive bay.
STEP 2: Connect one end of the SATA data cable to the motherboard’s one of
SATA connectors.
STEP 3: Connect the other end of the SATA data cable to the SATA hard disk.
STEP 4: Connect the power cable to the SATA hard disk.
STEP 5: Following step 1/2/3/4 to install the other SATA hard disks.
Install Parallel hard disks:
STEP 1: Setting one IDE hard disks as Master/Slave mode.
STEP 2: Install the hard disks into one drive bay.
STEP 3: Connect one end of the IDE cable to the motherboard’s one of IDE
connectors.
STEP 4: Connect the other end of the IDE cable to the IDE hard disk.
STEP 5: Connect the power cable to the IDE hard disk.
STEP 6: Following step 1/2/3/4 to install the other IDE hard disks.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn