Foxconn NF4SLI7AA-8EKRS2 Raid manual - Manual (Page 13)

11
Installing the RAID Driver (for bootable RAID Array)
1. After you complete the RAID BIOS setup, boot from the Windows CD, and the
Windows Setup program starts.
2. Press F6 and wait for the Windows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S, then press Enter. The Win-
dows Setup screen appears as below:
(2) Select “NVIDIA RAID CLASS DRIVER(required)” and then press Enter.
(3) Press S again at the Specify Devices (required) screen, then press Enter.
(4) Select “NVIDIA NForce Storage Controller” and then press Enter. The following
Windows Setup screen appears listing both drivers:
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn